|
Wordop Automation Technology Co., Ltd.
|
Trigger LightingLED Light Controller 60W , Machine Vision Products Strobe Ligting
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Trigger Lighting LED Light Controller 60W , Machine Vision Products Strobe Ligting
&
Trigger Lighting LED Light Controller 60W , Machine Vision Products Strobe Ligting
Product Features
PD-6024 is equiped with two kind of ON/OFF control: (1) External trigger signal input.
(2) Command input via EIA-485 communication.
External trigger signal input for strobe lighting, the lighting time can be set.
The PMW frequency can be changed, avoiding the rippling problem.
Lock setting function.Medical-grade switch.DIN rail mounting.
Small size, light weight, flexible installation.
Manual knob setting 256 levels of light intensity precisely.
When external trigger signal input is used, high or low levels can be flexibly applied and the
specified external control cable is recommended .
Power cut memory function, short-circuit protection and warning function
Model No. Demonstration:
|
PD- |
60 |
24 |
- |
4 |
|
Series |
Power |
Output voltage |
|
No. of channels |
*Feature:24V/digital light intensity cotrol/compliance with RoHS directive/wide voltage 110-240V/Over current protection/Powerboot restore.
Specification:
| Model | PD2-6024-4 | PD-6024-6 | PD-14024-2 |
| Lighting Method | Constant lighting / strobe lighting | ||
| Drive method | Constant voltage system | ||
| Light control method | PWM control and lighting time control | ||
| No. of channels | 4 | 6 | 2 |
| PMW Frequency | 62.5KHz,125KHz, 250KHz, 500KHz | ||
| Error Detection Display | Front-pannel digital display | ||
| Over Current Protection | Activated when output current overload 7% or more,reset by reopening the power supply | ||
| Input Voltage (rated) | AC 100V-240V | ||
| Trigger Function | Yes | ||
| Trigger input voltage | 5-24v | ||
| Output Voltage (rated) | DC 24V | ||
| Output Current (rated) | Each channel:2A | Each channel:5.8A | |
| Output Power | 60W | 140w | |
| Lighting Delay | 10µs max | ||
| Operating Environment | Temperature: 0 to 40, Humidity: 20% to 85% RH ( with no condensation) | ||
| Storage Environment | Temperature: -20 to 60, Humidity: 20% to 85% RH ( with no condensation) | ||
| Cooling Method | Nature Air Cooling | Forced Air Cooling | |
| Material &Surface Processing | SPCC Spray Painting | ||
| Weight | 1040g | 1980g | |
| Standard Accessory | EIA-485 communication cable (standard length 3m),EIA-485 to RS232 adoptor, AC power cable | ||
| Optional Accessory | trigger input cable, RS-232 to USB serial cable | ||
| Specification of control units with EIA-485 comunication protocol | |||
| Light intensity setting | Manual setting: any of 256 levels on the front panel | ||
| External command input via EIA-485 communication protocol | |||
| ON/OFF Setting | External trigger input or command input via EIA-485 | ||
| Lighting Mode Setting | Manual Setting: any of 11 levels on front-panel setting switch(F00-F10) | ||
| External command input via EIA-485 communications | |||
| Error Detetion Output | Activated when overload current output is detected | ||
| External Control Connector | Trigger input:MIL connector,10 pins | ||
| Lighting Intensity/ Lighting Mode Setting:e-CON connector 3 pins | |||
Dimension Diagram
Accessories
1.External trigger input cable (Model TRI-3)--Optional Accessory.
External trigger signal connection example.
External trigger input explanation
| No. | signal | Wire color(TRI-3) |
